Tlhaloso e Khutšoanyane:

Mokokotlolisebelisoa tsa bevel'me pinion e ne e sebelisoa ho bevel helical gearmotors .Ho nepahala ke DIN8 tlas'a mokhoa oa ho lapping.

Mojule:4.14

Meno: 17/29

Lehlakore la ho phahama: 59°37"

Angle ea khatello :20 °

Angle ea Shaft: 90 °

Moralo oa morao: 0.1-0.13

lintho tse bonahalang:20CrMnTi, tšepe e tlase ea alloy carton.

Pheko ea Mocheso: Carburization ho 58-62HRC.


Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Lintlha tsa sehlahisoa

Mefuta ena ealisebelisoa tsa bevelle pinion li sebelisoa ho bevel helical gearmotor e loketseng haholo lits'ebetso tsa conveyor. Ba fana ka phetoho e kholo ka lebaka la likhetho tsa bona tse tiileng le tse se nang letho.

Litlaleho tsa bohlokoa bakeng sa mefuta e joalo ea lisebelisoa tsa bevel ke:

1) Tlaleho ea boholo (hammoho le video ea tlhahlobo ea ho tsoa holimo)

2) Tlaleho ea lintho tse bonahalang pele ho phekoloa ha mocheso

3) Tlaleho ea Heat Treat hammoho le boima le Metallographic

4) Tlaleho ea tlhahlobo ea ho nepahala

5) Tlaleho ea Meshing Test (hammoho le sebaka sa bohareng, livideo tsa tlhahlobo ea backlash)

Setsi sa Tlhahiso :

Re akaretsa sebaka sa lihekthere tse 25 le sebaka sa moaho sa lisekoere-mithara tse 26,000, hape re na le lisebelisoa tsa tlhahiso ea pele le lisebelisoa tsa tlhahlobo ho fihlela litlhoko tse fapaneng tsa bareki.

e phuthetsoe ka lisebelisoa tsa spiral bevel
Feme ea lisebelisoa tsa bevel tse lapping

Mokhoa oa Tlhahiso:

lisebelisoa tse betliloeng tsa bevel

Ho qapa

li-gear tsa bevel tse pota-potiloeng

Lathe turning

ho siloa ha lisebelisoa tsa bevel

Milling

Phekolo ea mocheso oa li-bevel tse kentsoeng

Phekolo ea mocheso

lapped bevel gear OD ID ho sila

OD/ID ho sila

ho roala lisebelisoa tsa bevel

Lapping

Tlhahlobo :

tlhahlobo ea lisebelisoa tsa bevel

Litlaleho :, re tla fana ka litlaleho tse ka tlase hammoho le litšoantšo le livideo ho bareki pele ho thomello e 'ngoe le e' ngoe bakeng sa tumello ea ho roala likere tsa bevel.

1) Ho taka li-bubble

2) Tlaleho ea tekanyo

3) Setifikeiti sa lintho tse bonahalang

4) Tlaleho e nepahetseng

5) Tlaleho ea Phekolo ea Mocheso

6) Tlaleho ea Meshing

tlhahlobo ea lisebelisoa tsa bevel

Liphutheloana :

sephutheloana se ka hare

Sephutheloana se ka hare

khekhe ea ka hare 2

Sephutheloana se ka hare

Lebokose

Lebokose

sephutheloana sa lehong

sephutheloana sa lehong

Lenaneo la rona la video

Indasteri gearbox spiral bevel gear milling

Teko ea meshing bakeng sa lisebelisoa tsa bevel

Teko ea ho tsoa holimo bakeng sa likere tsa bevel

Ho roala lisebelisoa tsa bevel kapa ho sila likere tsa bevel

Li-gear tsa Spiral bevel

Bevel gear broaching

Bevel gear lapping VS bevel gear sila

Spiral bevel gear milling

Liroboto tsa indasteri spiral bevel gear milling mokhoa


  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona